HP Aruba JL253A Management And Configuration Manual page 482

Parameter
Diagnostic
Support
Serial Number Serial number of the transceiver
The information in the next three tables is only displayed when the transceiver supports DOM.
Table 33: DOM information
Parameter
Temperature
Voltage
Bias
RX power
TX power
The alarm information for GBIC/SFP transceivers is shown in this table.
Table 34: Alarm and error information (GBIC/SFP transceivers only)
Alarm
RX loss of signal
RX power high
RX power low
TX fault
TX bias high
TX bias low
TX power high
482
Description
Shows whether the transceiver supports diagnostics:
None
Supported
DOM
Supported
VCT
Supported
Description
Transceiver temperature (in degrees Centigrade)
Supply voltage in transceiver (Volts)
Laser bias current (mA)
Rx power (mW and dBm))
Tx power (mW and dBm)
Description
Incoming (RX) signal is lost
Incoming (RX) power level is high
Incoming (RX) power level is low
Transmit (TX) fault
TX bias current is high
TX bias current is low
TX power is high
Aruba 2930F / 2930M Management and Configuration Guide
Table Continued
for ArubaOS-Switch 16.08