Copy Crash-Data; Show Boot-History; Core-Dump - HP Aruba JL253A Management And Configuration Manual

copy crash-data

Copy the crash data file of the switch.
Syntax
copy crash-data vsf member <MEMBER-ID> <SLOT-ID-RANGE> | mm | sftp | tftp | usb |
xmodem sftp | tftp | usb | xmodem <HOST-NAME-STR> | <IP-ADDR> | <IPV6-ADDR>
<FILENAME-STR>
Description
Copy the switch crash data file.
Parameters
<MEMBER-ID>
The VSF member-ID for the member command or parameter. Member ID value can be in the range from 1 to
8.
<SLOT-ID-RANGE>
Enter the single slot identifier.

show boot-history

Syntax
show boot-history [vsf member <MEMBER-ID>]
Description
Display the system boot log for VSF.
Parameters
<MEMBER-ID>
The VSF member-ID for the member command or parameter. Member ID value can be in the range from 1 to
8.

core-dump

Enable/disable core-dump for the specified member. User can enable/disable core-dump for interface modules or
management module.
Syntax
core-dump interfaces | management-module | vsf | tftp-server member <MEMBER-ID> interfaces | management-module
Description
Enable/disable core-dump on the management module or the interface module.
Parameters
interfaces
Enable/disable core dump on all the interfaces.
management-module
Enable/disable core-dump on the management module.
tftp-server
Address of the auto TFTP server to which the files will be uploaded.
Chapter 20 Virtual Switching Framework (VSF) 687