Show Interface Config; Show Running-Config; Downgrade With Cli Reboot Command - HP Aruba JL253A Management And Configuration Manual

100MBT | 1.0GBT
Yes |

show interface config

Syntax
show interface config
Description
Displays port settings.
Example
switch#(config)show interface config
Port Settings
Port Type
----- ---------- + ------- ------------ --------- ----
A1 10GbE-T
A2 10GbE-T
A3 10GbE-T
A4 10GbE-T

show running-config

Syntax
show running-config
Description
The Smart Rate port auto-100 is part of the show running config output.
Example
switch(config)#show running-config
Running configuration:
; JL320A Configuration Editor; Created on release #WC.16.06.0000x
; Ver #13:03.f8.1c.9b.3f.bf.bb.ef.7c.59.fc.6b.fb.9f.fc.ff.ff.37.ef:49
module 1 type jl320a
flexible-module A type JL081A
interface A1
speed-duplex auto-100
exit

Downgrade with CLI reboot command

Procedure
1. If the Smart Rate port speed configuration is auto-100, boot system flash primary command will
prompt user to change the auto-100 to other configuration.
switch# boot system flash primary
This will reboot the system from the primary image.
772
| 2.5G NBT | 5.0G NBT | 2.5GBT | 5.0GBT | 10GBT
No | No
| Enabled Mode
| Yes Auto-100
| Yes Auto
| Yes Auto
| Yes Auto
| No | No
Flow Ctrl MDI
Disable
Disable
Disable
Disable
Aruba 2930F / 2930M Management and Configuration Guide
| No | N0
Auto
Auto
Auto
Auto
for ArubaOS-Switch 16.08