Single Copy Command - HP Aruba JL253A Management And Configuration Manual

For arubaos-switch 16.08

Table of Contents

A destination directory and files can be created for all crash files (core-dump, crash-data, crash-log, fdr-log,

and event-log) on an TFTP server (with write permissions).

Files are auto created on the SFTP server as a secured transfer. The destination directories however can be

manually created on the server.

NOTE: Specified directories can be used for the TFTP/SFTP transfers in the copy command. If the

directory is specified, all files will be copied under one directory, otherwise all files will be copied to

the TFTP/SFTP server home directory. It is mandatory to specify the directory name.

Single copy command

copy source destination options

Copy data files to and from the switch.

Specify the source of data using any of the following destinations.

Specify the data file to be copied from the source.

command-output

config file-

Operation note

For transfer of crash-files via SFTP, the destination directory must exist on the SFTP

server with write permissions.

File creation is not mandatory as files are automatically created with the chassis serial

number suffix to the filename when using SFTP.

For transfer of crash-files via TFTP, the destination directory along with the file names

(core-dump, crash-data, crash-log, fdr-log, and event-log) must exist on the TFTP

server with write permissions.

Operation note

Specify a command to copy output.

When using command-output, place the desired CLI command in double-quotes. For

example: "show system".

Copy named configuration file.

The file-name option is the source configuration file being copied.

Aruba 2930F / 2930M Management and Configuration Guide

Table Continued

for ArubaOS-Switch 16.08