Table of Contents
Advertisement
MAC Age Time (sec) : 300
Time Zone
Daylight Time Rule : None
Software revision
ROM Version
Up Time
CPU Util (%)
IP Mgmt - Pkts Rx
show flash
Image
-----
To specify the data displayed by the show tech command, use the copy show tech command.
Saving show tech command output to a text file
When you enter the show tech command, a summary of switch operational data is sent to your terminal
emulator. You can use your terminal emulator's text capture features to save the show tech data to a text file for
viewing, printing, or sending to an associate to diagnose a problem.
For example, if your terminal emulator is the Hyperterminal application available with Microsoft
software, you can copy the show tech output to a file and then use either Microsoft Word or Notepad to display
the data. (In this case, Microsoft Word provides the data in an easier-to-read format.)
The following example uses the Microsoft Windows terminal emulator. If you are using a different terminal
emulator application, see the documentation provided with the application.
Chapter 13 Troubleshooting
: 0
: XX.14.xx
: XX.12.12
: 23 hours
: 10
: 759
Pkts Tx : 2
Size(Bytes)
Date
-----------
------ --------
Base MAC Addr
Serial Number
Memory - Total :
Free :
Packet - Total : 6750
Buffers Free : 5086
Lowest : 4961
Missed : 0
Version
: 001871-c42f00
: SG641SU00L
®
®
Windows
535
Advertisement
Table of Contents
Troubleshooting
