Table of Contents
Advertisement
IP-ADDR
Adds an IPv4 address to the list of receiving syslog servers.
IPV6-ADDR
Adds an IPv6 address to the list of receiving syslog servers.
origin-id
Sends the Syslog messages with the specified origin-id.
notify
Notifies the specified type sent to the syslog server(s).
priority-descr
A text string associated with the values of facility, severity, and system-module.
severity
Event messages of the specified severity or higher sent to the syslog server.
system-module
Event messages of the specified system module (subsystem) sent to the syslog server.
hostname
Sets the hostname of the device as the origin-id.
none
Disables origin-id in the syslog message.
Add an IP address to the list of receiving syslog servers.
Use of no without an IP address specified will remove all IP addresses from the list of syslog receivers. If an IP
address is specified, that receiver will be removed. Both link-local with zone ID and global IPv6 addresses are
supported.
•
Specify syslog server facility with the option <facility>. The command no logging <facility> sets
the facility back to defaults.
•
Specify filtering rules.
•
Specify severity for event messages to be filtered to the syslog server with the option <severity>. The
command no logging <severity> sets the severity back to default.
•
Event messages of specified system module will be sent to the syslog server. Using no sends messages from
all system modules. Messages are first filtered by selected severity.
•
Specify syslog server transport layer with options [udp]|[tcp]|[tls].
•
Specify syslog server port number with options [udp PORT-NUM]|[tcp PORT-NUM]|[tls PORT-NUM].
•
Specify notification types to be sent to the syslog server.
•
Use the option transmission-interval to control the egress rate limit for transmitting notifications, 0 value
means there is no rate limit. The values are in seconds. Only one syslog message is allowed for transmission
within specified time interval.
•
Specify the origin information for the syslog messages with the option origin-id.
506
Aruba 2930F / 2930M Management and Configuration Guide
for ArubaOS-Switch 16.08
Advertisement
Table of Contents
Troubleshooting
