Event Log; Restrictions; Viewing Transceiver Information - HP Aruba JL253A Management And Configuration Manual

Event Log

Cause
Message
FFI: port <ID>- Excessive link state transitions.
FFI: port <ID>- Excessive link state
transitions.FFI: port <ID>-Port disabled by
Fault-finder.FFI: port <ID>-Administrator action
is required to re-enable.ports: Fault-finder (71)
has disabled port <ID>.ports: port <ID> is now
offline.vlan: VLAN<VLAN-ID> virtual LAN is
disabled.
FFI: port <ID>- Excessive link state
transitions.FFI: port <ID>-Port disabled by
Fault-finder.ports: Fault-finder(71) has disabled
port <ID> for <SECONDS> seconds.ports: port
<ID> is now off-line.vlan: VLAN<VLAN-ID>
virtual LAN is disabled.
port <ID> timer (71) has expired.ports: port
<ID> is now on-line.vlan: VLAN<VLAN-ID>
virtual LAN is enabled.

Restrictions

• Per port configuration for options – link-flap only. Global settings for other options.
• No support for menu interface.
• No support for Web UI.
• No support for trunks.

Viewing transceiver information

This features provides the ability to view diagnostic monitoring information for transceivers with Diagnostic Optical
Monitoring (DOM) support. The following table indicates the support level for specific transceivers:
Product #
J8436A
J8437A
J8440B
J8440C
478
Description
10GbE X2–SC SR
Optic
10GbE X2–SC LR Optic V
10GbE X2-CX4 Xcver
10GbE X2-CX4 Xcver
Cause
Link-flap is detected by fault-finder per the sensitivity
configured.
Link-flap is detected and the action is to disable the port with
no disable timer.
Link-flap is detected and the action is to disable the port with
disable timer.
The port is enabled when the disable timer expires.
1
Support
V
NA
NA
Aruba 2930F / 2930M Management and Configuration Guide
Table Continued
for ArubaOS-Switch 16.08