Limitations; Blocking Of Configuration From Other Sessions - HP Aruba JL253A Management And Configuration Manual

For arubaos-switch 16.08

Table of Contents

Limitations

Switch configuration restore without reboot feature does not support the following scenarios:

Removing a physically present member through cfg-restore command

Flex-module provisioning or removal on standalone or a stack

Module provisioning or removal on standalone or a stack

Adding a VLAN when the VLAN limit is already reached by having dynamic VLANs. Due to timing issues, ports

or dynamic VLANs take some time to become offline or be removed, even after applying a removal command.

In such a case, restore commands fail as normal CLI commands.

The maximum number of backup configuration files has been increased from three to five. When the firmware

is downgraded to lower versions, the show config files command displays the details to only three

configuration files.

Restore is allowed based on the available system resource factors.

All write operations are not allowed from other sessions (CLI/WebUI/SNMP/REST, and so on) during a

configuration restoration process. Only read operation is allowed. Attempts to use write operation results in the

Configuration restore is in progress, configuration changes are temporarily

disabled error. The following show commands are blocked during a configuration restoration process:

show running-config

show startup-config

Aruba 2930F / 2930M Management and Configuration Guide

for ArubaOS-Switch 16.08