Sp Mode Settings For Ieee 802.11 Wireless Lan - Ricoh SP 8400DN Field Service Manual

Ricoh a3 size black and white laser printer.

Hide thumbs Also See for SP 8400DN:

User manual (108 pages)

Manual (73 pages)

Quick installation manual (2 pages)

Table of Contents

Press "Machine Features" > "System Settings".

Select "Interface Settings"> "Network" > "LAN Type". The "LAN Type" (default: Ethernet) must

be set for either Ethernet or wireless LAN.

Select "Interface Settings"> "Wireless LAN". Only the wireless LAN options show.

Set the "Communication Mode".

Enter the "SSID setting". (The setting is case sensitive.)

Set the "Ad-hoc Channel". You need this setting when Ad Hoc Mode is selected. The allowed range for the

channel settings may vary for different countries.

For mainly Europe and Asia

2412 - 2462 MHz (1 - 11 channels)

5180 - 5240 MHz (36, 40, 44 and 48 channels)

(default: 11)

In some countries, only the following channels are available: 2412 - 2462 MHz (1 - 11 channels)

For mainly North America

2412 - 2462 MHz (1 - 11 channels)

5180 - 5240 MHz (36, 40, 44 and 48 channels)

(default: 11)

Set the "Security Method" to specify the encryption of the Wireless LAN.

The "WEP" (Wired Equivalent Privacy) setting is designed to protect wireless data transmission. The

same WEP key is required on the receiving side in order to unlock encoded data. There are 64 bit and

128 bit WEP keys.

Range of Allowed Settings:

64 bit: 10 characters

128 bit: 26 characters

Specify "WPA2" when "Communication Mode" is set to "Infrastructure Mode". Set the "WPA2

Authent. Method".

WPA2 Authent. Method:

Select either "WPA2-PSK" or "WPA2".

If you select "WPA2-PSK", enter the pre-shared key (PSK) of 8-63 characters in ASCII code.

When "WPA2" is selected, authentication settings and certificate installation settings are

Press "Wireless LAN Signal" to check the machine's radio wave status using the operation panel.

Press "Restore Factory Defaults" to initialize the wireless LAN settings.