Table of Contents
Advertisement
Port Level Egress-Rate Command Reference
Show Commands
port
Syntax
port [port-id]
Context
show
Description
This command displays Egress-Rate and Max-Burst value set for port along with other details of
the port.
Parameters
port-id —
Sample Output
*A:dut-1>config>qos>network-queue# show port 1/1/1
===============================================================================
Ethernet Interface
===============================================================================
Description
Interface
Link-level
Admin State
Oper State
Physical Link
IfIndex
Last State Change
Last Cleared Time
Configured Mode
Dot1Q Ethertype
Net. Egr. Queue Pol: default
Egr. Sched. Pol
Auto-negotiate
Accounting Policy
Egress Rate
Uplink
Down-when-looped
Loop Detected
Configured Address : 00:78:76:45:54:02
Hardware Address
Cfg Alarm
Alarm Status
Transceiver Data
Transceiver Type
Model Number
TX Laser Wavelength: 850 nm
Page 104
Displays information about the specific port ID.
: 10/100/Gig Ethernet SFP
: 1/1/1
: Ethernet
: up
: up
: Yes
: 35684352
: 01/17/2011 04:05:37
: N/A
: access
: 0x8100
: default
: limited
: None
: Default
: No
: Disabled
: False
: 00:78:76:45:54:02
:
:
: SFP
: 3HE00027AAAA02
7210 SAS D, E, K OS Quality of Service Guide
Oper Speed
Config Speed
Oper Duplex
Config Duplex
MTU
Hold time up
Hold time down
Encap Type
QinQ Ethertype
Access Egr. Qos *: 1
Network Qos Pol
MDI/MDX
Collect-stats
Max Burst
Keep-alive
Retry
ALA
IPUIAELDAB=
Diag Capable
: 1 Gbps
: 1 Gbps
: full
: full
: 1514
: 0 seconds
: 0 seconds
: null
: 0x8100
: n/a
: MDI
: Disabled
: Default
: 10
: 120
: yes
Advertisement
Table of Contents
