Alcatel-Lucent 7210 SAS Series Quality Of Service Manual page 445

Service access switch, os
Table of Contents

Advertisement

start-threshold
Syntax
start-threshold percent
no start-threshold
Context
config>qos>slope-policy>high-slope
config>qos>slope-policy>low-slope
Description
This command sets the low priority or high priority Random Early Detection (RED) slope position
for the shared buffer instantaneous utilization value where the packet discard probability comes
into affect. The percent parameter is expressed as a percentage of the shared buffer size.
The no form of this command restores the start-threshold value to the default setting.
Default
start-threshold 75 — High slope default is 75% buffer utilization before discard probability comes into
affect.
start-threshold 50 — Low slope default is 50% buffer utilization before discard probability comes into
affect.
Parameters
percent — The percentage of the shared buffer space for the buffer pool at which point the drop probability
comes into affect.
Values
queue
Syntax
queue queue-id drop-rate num
no queue queue-id
Context
config>qos>slope-policy>high-slope
config>qos>slope-policy>low-slope
Description
The drop-rate num parameter is expressed as a scalar number, and mapping to the percent of
packets dropped in congestion conditions is specified in
Mapping Values, on page
default setting.
Default
drop-rate 1 — High slope default is 1 (6.25 drop-rate) for all the queues, this implies that once the
shared buffer utilization reaches the start-threshold level then packets egressing out from a
particular queue would be dropped at 6.25% rate.
drop-rate 0 — Low slope default is 0 (100% drop-rate) for all the queues, this implies that once the
shared buffer utilization reaches the start-threshold level then packets egressing out from a
particular queue would be dropped at 100% rate.
Parameters
queue-id —
Values
7210 SAS D, E, K OS Quality of Service Guide
0 — 100
48. The no form of this command restores the drop-rate value to the
Specifies the ID of the queue for which the drop-rate is to be configured.
1 — 8
Operational Commands
Table 16, Drop Rate Value to Percent
Page 501

Advertisement

Table of Contents
loading

This manual is also suitable for:

7210 sas k7210 sas d7210 sas e

Table of Contents