Table of Contents
Advertisement
Service Ingress QoS Policy Commands
When DEI based classification is enabled, it overrules the profile values specified in the
classification entry used to assign the FC.
The no form of the command disables use of DEI bit for classification of packets.
Default
no use-dei
fc
Syntax
[no] fc fc-name [create]
Context
config>qos>network>ingress
config>qos>sap-ingress
Description
The fc command creates a class instance of the forwarding class fc-name. Once the fc-name is created,
classification actions can be applied and can be used in match classification criteria.
The no form of the command removes all the explicit queue mappings for fc-name forwarding types. The
queue mappings revert to the default meters for fc-name.
Parameters
fc-name — Specifies the forwarding class name for the queue. The value given for the fc-name must be one
of the predefined forwarding classes for the system.
Values
Default
create — Mandatory keyword to create a forwarding class.
multicast-queue
Syntax
multicast-queue queue-id
no multicast-queue
Context
config>qos>sap-ingress>fc
config>qos>network>fc
Description
This command overrides the default multicast forwarding type queue mapping for fc fc-name. The specified
queue-id must exist within the policy as a multipoint queue before the mapping can be made. Once the
forwarding class mapping is executed, all broadcast, unknown unicast, and multicast (BUM) traffic on a
SAP or a access-uplink port using this policy is forwarded using the queue-id.
The no form of the command removes the association of the FC and the queue. Once the no form is
executed, the BUM traffic uses the default multicast forwarding type queue.
The default multicast forwarding type queue is the default unicast queue (queue 1). In other words, if no
multicast queue is assigned to a FC, it uses default queue 1.
Page 306
fc:
None (Each class-name must be explicitly defined)
7210 SAS D, E, K OS Quality of Service Guide
class
class: be, l2, af, l1, h2, ef, h1, nc
Advertisement
Table of Contents
