Table of Contents
Advertisement
Service Ingress QoS Policy Entry Commands
action
Syntax
action [fc fc-name] profile {in|out | use-dei}
no action
Context
config>qos>sap-ingress>ip-criteria>entry
config>qos>sap-ingress>mac-criteria>entry
Description
This mandatory command associates the forwarding class with specific IP or MAC criteria entry ID. The
action command supports setting the forwarding class parameter. Packets that meet all match criteria within
the entry have their forwarding class overridden based on the parameters included in the action parameters.
The action command must be executed for the match criteria to be added to the active list of entries.
Each time action is executed on a specific entry ID, the previous entered values for fc fc-name is overridden
with the newly defined parameters.
The no form of the command removes the entry from the active entry list. Removing an entry on a policy
immediately removes the entry from all SAPs using the policy. All previous parameters for the action is lost.
Default
Action specified by the default-fc.
Parameters
fc fc-name — The value given for fc fc-name must be one of the predefined forwarding classes in the
system. Specifying the fc fc-name is required. When a packet matches the rule, the forwarding class is
only overridden when the fc fc-name parameter is defined on the rule. If the packet matches and the
forwarding class is not explicitly defined in the rule, the forwarding class is inherited based on previous
rule matches.
Values
profile {in | out} — The profile assignment action is optional. When specified, packets matching the
classification entry will be explicitly classifier to either in-profile or out-of-profile. The remove the
profile action for an classification entry, the action command must be re-executed without the profile
action defined. The profile assigned by the user is used subsequently to determine the slope to use at the
ingress and egress queuing points and is used for egress marking (if enabled).
in — The in parameter is mutually excusive to the out parameter following the profile classification action
keyword. Either in or out must be specified when the profile keyword is present. When in is specified,
any packets matching the classification rule will be treated as in-profile.
out — The out parameter is mutually excusive to the in parameter following the profile classification action
keyword. Either in or out must be specified when the profile keyword is present. When out is specified,
any packets matching the classification rule will be treated as out-of-profile.
use-dei — Specifies whether DEI must be used to determine the initial profile of the packet.
7210 SAS D, E, K OS Quality of Service Guide
be|l2|af|l1|h2|ef|h1|nc
Operational Commands
Page 315
Advertisement
Table of Contents
