Table of Contents
Advertisement
IP QoS Policy Match Commands
dscp
Syntax
dscp dscp-value|dscp-name [dscp-mask]
no dscp
Context
config>qos>sap-ingress>ip-criteria>entry>match
config>qos>sap-ingress>ipv6-criteria>entry>match
Description
This command configures a DiffServ Code Point (DSCP) code point to be used for classification of packets
from the specified FC.
The no form of this command removes the DSCP match criterion.
NOTES:
•
•
•
Default
none
Parameters
dscp-value — Specifies the DSCP value in either hexdecimal format, decimal format or binary format.
Values
dscp-name — Specifies a dscp name that has been previously mapped to a value using the dscp-name
command. The DiffServ code point can only be specified by its name.
Values
dscp-mask — This 6-bit mask can be configured using the following formats:
Format Style
Decimal
Hexadecimal
Binary
To select a range from 4 up to 7 specify 4 and 0b000100 for value and mask.
Values
Default
7210 SAS D, E, K OS Quality of Service Guide
This feature is applicable for ip-criteria (any and dscp-only) and ipv6-criteria (any and dscp-only).
The user should not be allowed to configure dscp name and dscp mask combinations.
When the user configures dscp value alone, the "show" command has to display dscp value as
configured value and dscp mask as "FC".
[0..64]
be, cp1, cp2, cp3, cp4, cp5, cp6, cp7, cs1, cp9, af11, cp11, af12, cp13, af13, cp15, cs2,
cp17, af21, cp19, af22, cp21, af23, cp23, cs3, cp25, af31, cp27, af32, cp29, af33, cp31,
cs4, cp33, af41, c p35, af42, cp37, af43, cp39, cs5, cp41, cp42, cp43, cp44, cp45, ef, cp47,
nc1, cp49, cp50, cp51, cp52, cp53, cp54, cp55, nc2, cp57, cp58, cp59, cp60, cp61, cp62,
cp63
[0..64] (accepts decimal hex or binary)
64 (exact match)
Format Syntax
D
0xH
0bBBB
Operational Commands
Example
4
0x4
0b100
Page 319
Advertisement
Table of Contents
