Table of Contents
Advertisement
Service Ingress QoS Policy Forwarding Class Commands
unknown-meter
Syntax
unknown-meter meter-id
no unknown-meter
Context
config>qos>sap-ingress>fc
Description
This command overrides the default unknown unicast forwarding type meter mapping for fc fc-name. The
specified meter-id must exist within the policy as a multipoint meter before the mapping can be made. Once
the forwarding class mapping is executed, all unknown traffic on a SAP using this policy is forwarded using
the meter-id.
The unknown forwarding type usually tracks the multicast forwarding type definition. This command
overrides that default behavior.
The no form of this command sets the unknown forwarding type meter-id back to the default of tracking the
multicast forwarding type meter mapping.
Parameters
meter-id — Specifies an existing multipoint meter defined in the config>qos>sap-ingress context.
Values
Values
Default
Page 314
2— 18 (for 7210 SAS-E)
2 to 32 (for 7210 SAS-D)
11
7210 SAS D, E, K OS Quality of Service Guide
Advertisement
Table of Contents
