Alcatel-Lucent 7210 SAS Series Quality Of Service Manual page 284

Service SAP QoS Policy Command Reference
IPv6 Commands
Page 296
— renum [old-entry-id new-entry-id]
— [no] ipv6-criteria [any | dscp-only] [IPv6 Match Criteria]
— [no] entry
— action
— no
— description
— no
— match
— no
— renum [old-entry-id new-entry-id]
— [no] mac-criteria [any |dot1p-only]
— [no] entry
— action
— no
— description
— no
— [no]
— renum
— num-qos-classifiers
— meter meter-id [multipoint] [create]
— no meter meter-id
— adaptation-rule
— no adaptation-rule
— cbs size-in-kbits (supported on 7210 SAS-E)
— no cbs
— cbs size [kbits|bytes|kbytes] (supported on 7210 SAS-D)
— no cbs
— color-mode
— no color-mode
— mbs size-in-kbits (supported on 7210 SAS-E)
— no mbs
— mbs size [kbits|bytes|kbytes] (supported on 7210 SAS-D)
— no mbs
7210 SAS D, E, K OS Quality of Service Guide
— no src-port
entry-id [create]
[fc fc-name]
action
description-string
description
[next-header next-header]
match
— dscp dscp-value |dscp-name [dscp-mask]
— no dscp
— dst-ip {ipv6-address/prefix-length}
— no dst-ip
— dst-port {eq} dst-port-number}
— no dst-port
— ip-prec ip-prec-value [ip-prec-mask]
— no ip-prec
— src-ip {ipv6-address/prefix-length}
— no src-ip
— src-port{eq} src-port-number
— no src-port
entry-id [create]
[fc fc-name]
action
description-string
description
match
— dot1p dot1p-value [dot1p-mask]
— no dot1p
— dst-mac ieee-address [ieee-address-mask]
— no dst-mac
— etype 0x0600..0xffff
— no etype
— src-mac ieee-address [ieee-address-mask]
— no src-mac
old-entry-id new-entry-id
[num-resources] [ipv6 | no-ipv6]
[cir adaptation-rule] [pir adaptation-rule]
color-mode