Table of Contents
Advertisement
Network Egress QoS Policy Forwarding Class Commands
Table 36: Show QoS Network Output Fields (Continued)
Accounting
Dot1p Bit Mapping:
Out-of-Profile
In-Profile
Port-Id
7210 SAS-E
*A:SN12345678# show qos network 1
===============================================================================
QoS Network Policy
===============================================================================
-------------------------------------------------------------------------------
Network Policy (1)
-------------------------------------------------------------------------------
Policy-id
Forward Class
Attach Mode
Scope
Description
-------------------------------------------------------------------------------
Meter Mode
-------------------------------------------------------------------------------
1
9
-------------------------------------------------------------------------------
FC
-------------------------------------------------------------------------------
No FC-Map Entries Found.
-------------------------------------------------------------------------------
Port Attachments
-------------------------------------------------------------------------------
Port-id : 1/1/24
===============================================================================
*A:SN12345678#
7210 SAS-D
Page 180
Label
Packet-based —
this policy do not account for packet framing overheads (such as
Ethernet the Inter Frame Gap (IFG) and the preamble), while
accounting for the bandwidth to be used by this flow.
Frame-based —
policy account for the packet framing overheads (such as for
Ethernet the IFG and preamble), while accounting the band-
width to be used by the flow.
Displays the Dot1p value used for out-of-profile traffic.
Displays the Dot1p value used for in-profile traffic.
Specifies the physical port identifier that associates the interface.
: 1
: be
: l2
: Template
: Default network QoS policy.
CIR Admin
CIR Rule
TrTcm_CA
0
closest
TrTcm_CA
0
closest
UCastM
7210 SAS D, E, K OS Quality of Service Guide
Description
Specifies that the meters associated with
Specifies that the meters associated with this
Remark
Profile
Config Mode
PIR Admin
PIR Rule
max
closest
max
closest
MCastM
: True
: Out
: l2
CBS
MBS
32
128
32
128
Advertisement
Table of Contents
