Table of Contents
Advertisement
The command adds the capability to mark on an egress the in and out of profile status via a certain
dot1p combination (similar to DEI option). It may be used when the internal in and out of profile
status needs to be communicated to an adjacent network/customer device that does not support the
DEI bit.
This command explicitly defines the egress IEEE 802.1P (dot1p) bits marking for fc-name. When
the marking is set, all packets with out-profile status (or yellow color) of fc-name that have either
an IEEE 802.1Q or IEEE 802.1P encapsulation use the explicitly defined dot1p-value. If the egress
packets for fc-name are not IEEE 802.1Q or IEEE 802.1P encapsulated, this command has no
effect.
The no form of the command reverts to the default out-profile dot1p-priority setting for policy-id
1.
Parameters
dot1p-priority — This value is a required parameter that specifies the unique IEEE 802.1P value that will
match the dot1p rule. If the command is executed multiple times with the same dot1p-value, the
previous forwarding class and enqueuing priority is completely overridden by the new parameters or
defined to be inherited when a forwarding class or enqueuing priority parameter is missing.
A maximum of eight dot1p rules are allowed on a single policy.
Values
dscp-in-profile
Syntax
dscp-in-profile dscp-name
no dscp-in-profile
Context
config>qos>network >egress>fc fc-name
Description
This command specifies the in-profile DSCP name for the forwarding class. When marking is set,
the corresponding DSCP value is used to mark all IP packets with in-profile status, on the egress
of this forwarding class queue.
When multiple DSCP names are associated with the forwarding class at network egress, the last
name entered will overwrite the previous value.
The no form of this command reverts to the factory default in-profile dscp-name setting for policy-
id 1.
Parameters
dscp-name — System- or user-defined, case-sensitive dscp-name.
Default
Values
7210 SAS D, E, K OS Quality of Service Guide
0 — 7
none
Any defined system- or user-defined dscp-name
Operational Commands
Page 177
Advertisement
Table of Contents
