Alcatel-Lucent 7210 SAS Series Quality Of Service Manual page 290

Service access switch, os
Table of Contents

Advertisement

Generic Commands
Operational Commands
NOTE: The 7210 platform QoS capabilities varies across platforms. In the description the term queue/
meter is used and based on the platform capabilities both of them or one of them can be used. The
description also mentions the capabilities of the node/platform in certain commands, as applicable.
copy
Syntax
copy sap-ingress src-pol dst-pol [overwrite]
copy dot1p-classification src-pol dst-pol [overwrite]
copy dscp-classification src-pol dst-pol [overwrite]
Context
config>qos
Description
This command copies existing QoS policy entries for a QoS policy-id to another QoS policy-id.
The copy command is a configuration level maintenance tool used to create new policies using existing
policies. It also allows bulk modifications to an existing policy with the use of the overwrite keyword.
Parameters
sap-ingress src-pol dst-pol — Indicates that the source policy ID and the destination policy ID are SAP
ingress policy IDs. Specify the source policy ID that the copy command will attempt to copy from and
specify the destination policy ID to which the command will copy a duplicate of the policy.
Values
overwrite — Specifies to replace the existing destination policy. Everything in the existing destination
policy will be overwritten with the contents of the source policy. If overwrite is not specified, an error
will occur if the destination policy ID exists.
dot1p-classification — Indicates that the source policy ID and the destination policy ID are Dot1p
classification policy IDs. Specify the source policy ID that the copy command will attempt to copy from
and specify the destination policy ID to which the command will copy a duplicate of the policy.
Values
dscp -classification — Indicates that the source policy ID and the destination policy ID are IP DSCP
classification policy IDs. Specify the source policy ID that the copy command will attempt to copy from
and specify the destination policy ID to which the command will copy a duplicate of the policy.
Values
Page 300
1 — 65535
1 — 65535
1 — 65535
7210 SAS D, E, K OS Quality of Service Guide

Advertisement

Table of Contents
loading

This manual is also suitable for:

7210 sas k7210 sas d7210 sas e

Table of Contents