Alcatel-Lucent 7210 SAS Series Quality Of Service Manual page 314

Service Ingress MAC QoS Policy Match Commands
Service Ingress MAC QoS Policy Match Commands
dot1p
Syntax dot1p dot1p-value [dot1p-mask]
no dot1p
Context config>qos>sap-ingress>mac-criteria>entry
Description
Platforms Supported:7210 SAS-D and 7210 SAS-E.
The IEEE 802.1p value to be used as the match criterion.
Use the no form of this command to remove the dot1p value as the match criterion.
Default None
Parameters dot1p-value — Enter the IEEE 802.1p value in decimal.
Values
dot1pmask — This 3-bit mask can be configured using the following formats:
Format Style
Decimal
Hexadecimal
Binary
To select a range from 4 up to 7 specify p-value of 4 and a mask of 0b100 for value and mask.
Default
Values
dst-mac
Syntax dst-mac ieee-address [ieee-address-mask]
no dst-mac
Context config>qos>sap-ingress>mac-criteria>entry
Description
Configures a destination MAC address or range to be used as a Service Ingress QoS policy match criterion.
The no form of this command removes the destination mac address as the match criterion.
Default none
Page 324
0 — 7
Format Syntax
7 (decimal) (exact match)
1 — 7 (decimal)
7210 SAS D, E, K OS Quality of Service Guide
D
0xH
0bBBB
Example
4
0x4
0b100