Table of Contents
Advertisement
Network Ingress QoS Policy Commands
default-action
Syntax
default-action fc fc-name [profile {in | out}]
Context
config>qos>network>ingress
Description
This command defines or edits the default action to be taken for packets that have an undefined
Dot1p bits set. The default-action command specifies the forwarding class to which such packets
are assigned.
Multiple default-action commands will overwrite each previous default-action command.
Default
default-action fc be profile out
Parameters
fc fc-name — Specify the forwarding class name. All packets with Dot1p or dot1p bits that is not defined
will be placed in this forwarding class.
Default
Values
profile {in | out} — All packets that are assigned to this forwarding class will be considered in or out of
profile based on this command. A value of 'in' defines the packet profile as 'in-profile' and a value of
'out' defines the packet profile to be out-of-profile.
fc
Syntax
[no] fc fc-name [create]
Context
config>qos>network>ingress
Description
This command creates a class instance of the forwarding class. Once the fc-name is created,
classification actions can be applied and it can be used in match classification criteria.
The no form of the command removes all the explicit meter mappings for fc-name forwarding
types. The meter mappings revert to the default meters for fc-name.
Default
Undefined forwarding classes default to the configured parameters in the default policy policy-id
1.
Parameters
fc-name — The case-sensitive, system-defined forwarding class name for which policy entries will be
created.
Values
create — The keyword used to create the forwarding class. The create keyword requirement can be
enabled/disabled in the environment>create context.
Page 160
None, the fc name must be specified
be, l2, af, l1, h2, ef, h1, nc
be, l2, af, l1, h2, ef, h1, nc
7210 SAS D, E, K OS Quality of Service Guide
Advertisement
Table of Contents
