Overview
*A:7210SAS>config>qos>remark#
Editing QoS Policies
Existing policies and entries can be edited through the CLI or NMS. The changes are applied
immediately to all services where the policy is applicable.
To prevent configuration errors perform the following:
1. Copy the policy to a work area
2. Edit the policy
3. Over write the original policy
Page 452
dot1p-inner in-profile 4 out-profile 4
dot1p-outer in-profile 6 out-profile 3
exit
fc l1
de-mark-outer force 1
dot1p-inner in-profile 2 out-profile 6
dot1p-outer 4
exit
fc l2
de-mark-outer
dot1p-inner 7
dot1p-outer 3
exit
fc nc
no de-mark-outer
dot1p-inner in-profile 2 out-profile 4
dot1p-outer in-profile 5 out-profile 6
exit
7210 SAS D, E, K OS Quality of Service Guide