Table of Contents
Advertisement
Network Queue QoS Policy Commands
Show Commands
network-queue
Syntax
network-queue [network-queue-policy-name] [detail]
Description
This command displays network queue policy information.
Context
show>qos
Parameters
network-queue-policy-name — The name of the network queue policy.
Values
detail — Includes each queue's rates and adaptation-rule and & cbs details. It also shows FC to queue
mapping details.
Policy
Accounting
Description
Port-Id
Queue
CIR
PIR
CBS
FC
*A:card-1# show qos network-queue nq1
===============================================================================
QoS Network Queue Policy
-------------------------------------------------------------------------------
Network Queue Policy (nq1)
Page 216
Valid names consist of any string up to 32 characters long composed of printable, 7-bit
ASCII characters. If the string contains special characters (#, $, spaces, etc.), the entire
string must be enclosed within double quotes.
Table 39: Network Queue Labels and Descriptions
Label
The policy name that uniquely identifies the policy.
Displays whether the accounting mode is packet-based or frame-
based.
A text string that helps identify the policy's context in the config-
uration file.
Displays the physical port identifier where the network queue
policy is applied.
Displays the queue ID.
Displays the committed information rate.
Displays the peak information rate.
Displays the committed burst size.
Displays FC to queue mapping.
7210 SAS D, E, K OS Quality of Service Guide
Description
Advertisement
Table of Contents
