Table 18: Service Ingress Qos Policy Ip Match Criteria For 7210 Sas-K; Table 19: Service Ingress Qos Policy Ipv6 Match Criteria For 7210 Sas-K; Table 20: Service Ingress Qos Policy Mac Match Criteria For 7210 Sas-K; Table 21: Lists The Criteria That Can Be Matched For The Various Mac Frame Types - Alcatel-Lucent 7210 SAS Series Quality Of Service Manual

Table 18: Service Ingress QoS Policy IP Match Criteria for 7210 SAS-K

• IP DSCP (available for access SAPs in VPLS and
VLL services)

Table 19: Service Ingress QoS Policy IPv6 Match Criteria for 7210 SAS-K

• IP DSCP (available for SAPs in VPLS and VLL ser-
vices)

Table 20: Service Ingress QoS Policy MAC Match Criteria for 7210 SAS-K

• IEEE 802.1p/Dot1p value/mask, Source MAC
address/mask, Destination MAC address/mask,
EtherType Value/Mask
Note that 7210 SAS-K does not support configuring of the frame-type match criteria and the
default frame type configured is Ethernet - II. See
for the various MAC frame types., on page 61

Table 21: Lists the criteria that can be matched for the various MAC frame types.

Note: The default frame type configured is Ethernet - II
Frame Format
802.3 IEEE
802dot2-llc
7210 SAS D, E, K OS Quality of Service Guide
IP Criteria
IPv6 Criteria
MAC Criteria
802.3 Ethernet frame. Only the source MAC, destination MAC and
IEEE 802.1p value are compared for match criteria.
IEEE 802.3 Ethernet frame with an 802.2 LLC header. Only the source
MAC and destination MAC address are compared for match criteria.
IP DSCP, IP source and mask, IP
destination and mask, IP protocol,
TCP/UDP
source port, TCP/UDP destination
port, fragment.
IP DSCP, IPv6 128-bit source and
mask, IPv6 128-bit destination and
mask, IP
protocol/next-header, TCP/UDP
source port, TCP/UDP destination
port.
The MAC match criteria that can be
used for an Ethernet frame depends
on the frame's format.
Table 21, Lists the criteria that can be matched
Description
QoS Policies
Page 55