Table of Contents
Advertisement
scope
Syntax
scope {exclusive | template}
no scope
Context
config>qos>access-egress
Description
This command configures the scope as exclusive or template. The policy's scope cannot be
changed if the policy is applied to multiple ports.
The no form of this command sets the scope of the policy to the default of template.
Default
template
Parameters
exclusive — When the scope of a policy is defined as exclusive, the policy can only be applied to one port.
If a policy with an exclusive scope is assigned to a second interface an error message is generated. If the
policy is removed from the exclusive interface, it will become available for assignment to another
exclusive interface.
The system default policies cannot be put into the exclusive scope. An error will be generated if scope
exclusive is executed in default access-egress policy (policy-id 1).
template — When the scope of a policy is defined as template, the policy can be applied to multiple ports
on the router.
access-egress
Syntax
access-egress [policy-id] [association | detail]
Context
show>qos
Description
This command displays access egress QoS policy information.
Parameters
policy-id — Displays the policy id of the access-egress policy.
association — Displays associations related to the specified access-egress policy.
detail — Displays detailed policy information including the policy associations.
Access-Egress Output — The following table describes Access-egress show command output.
Policy-Id
7210 SAS D, E, K OS Quality of Service Guide
Label
The ID that uniquely identifies the policy.
Description
Page 367
Advertisement
Table of Contents
