Table of Contents
Advertisement
Basic Configurations
In the example above, assuming the policy is attached to a SAP in a VPLS service, compute the
classification entries per FC as:
FCnc = 1 + 1 + 1 + 0 = 3
Since this FC uses unicast, broadcast and multicast meter, three entries are required to identify
these traffic types explicitly. Unknown-unicast traffic type is classified using the same entry as
multicast traffic type and uses the same meter.
FCh1 = 1 + 1 + 1 + 1 = 4
Since this FC uses unicast, broadcast, multicast and unknown-unicast meter, four entries are
required to identify these traffic types explicitly.
FCef = 1 + 1 + 1 + 0 = 3
Since this FC uses unicast, broadcast and multicast meter, three entries are required to identify
these traffic types explicitly. Unknown-unicast traffic type is classified using the same entry as
multicast traffic type and uses the same meter.
FCh2 = 1 + 1 + 1 + 0 = 3
Page 264
dot1p 5 7
exit
action fc "l1"
exit
entry 3 create
match
dot1p 6 7
exit
action fc "h2"
exit
entry 4 create
match
dot1p 3 7
exit
action fc "h1"
exit
entry 5 create
match
dot1p 2 7
exit
action fc "ef"
exit
entry 6 create
match
dot1p 7 7
exit
action fc "nc"
exit
exit
default-fc "be"
7210 SAS D, E, K OS Quality of Service Guide
Advertisement
Table of Contents
