Alcatel-Lucent 7210 SAS Series Quality Of Service Manual page 480

Service access switch, os
Table of Contents

Advertisement

dscp-out-profile
Syntax
dscp-out-profile dscp-name
no dscp-out-profile
Context
config> qos> remark> fc
Description
Platforms Supported: 7210 SAS-K.
This command specifies the out-of-profile DSCP name for the forwarding class. When marking is
set, the corresponding DSCP value is used to mark all IP packets with out-of-profile status, on the
egress of this forwarding class queue.
When multiple DSCP names are associated with the forwarding class in the policy, the last name
entered will overwrite the previous value.
The no form of this command reverts to the factory default out-of-profile dscp-name setting for
policy-id 1.
dscp-name — System- or user-defined, case-sensitive dscp-name.
Parameters
Default
Values
dot1p-outer
Syntax
[no] dot1p-outer [in-profile dot1p-value] [out-profile dot1p-value]
Context
config> qos> remark> fc>
Description
Platforms Supported: 7210 SAS-K.
The command will add the capability to mark on an egress the in and out profile status via a certain
dot1p combination, similarly with the DEI options. It may be used when the internal in and out of
profile status needs to be communicated to an adjacent network/customer device that does not
support the DEI bit.
This command explicitly defines the egress IEEE 802.1P (dot1p) bits marking for fc-name. When
the marking is set, all packets with in-profile status (or green color) of fc-name that have either an
IEEE 802.1Q or IEEE 802.1P encapsulation use the explicitly defined in-profile dot1p-value.
Similarly all the packet with out-of-profile status use the explicitly defined out-profile dot1p-
value. If the egress packets for fc-name are not IEEE 802.1Q or IEEE 802.1P encapsulated, this
command has no effect.
Page 462
none
For 7210 SAS-K:
be|cp1|cp2|cp3|cp4|cp5|cp6|cp7|cs1|cp9|af11|cp11|af12|cp13|af13|cp15|cs2|cp17|af21|cp19|
af22|cp21|af23|cp23|cs3|cp25|af31|cp27|af32|cp29|af33|cp31|cs4|cp33|af41|cp35|af42|cp3
7|af43|cp39|cs5|cp41|cp42|cp43|cp44|cp45|ef|cp47|nc1|cp49|cp50|cp51|cp52|cp53|cp54|cp
55|nc2|cp57|cp58|cp59|cp60|cp61|cp62|cp63
7210 SAS D, E, K OS Quality of Service Guide

Advertisement

Table of Contents
loading

This manual is also suitable for:

7210 sas k7210 sas d7210 sas e

Table of Contents