Table of Contents
Advertisement
Sample for 7210 SAS-K
*A:SAH01-051>show>qos# slope-policy "default"
===============================================================================
QoS Slope Policy
===============================================================================
Policy
Description
-------------------------------------------------------------------------------
High Slope Parameters
-------------------------------------------------------------------------------
Start Avg
Max Avg
-------------------------------------------------------------------------------
Low Slope Parameters
-------------------------------------------------------------------------------
Start Avg
Max Avg
-------------------------------------------------------------------------------
High Slope Ring Parameters
-------------------------------------------------------------------------------
Start Avg
Max Avg
-------------------------------------------------------------------------------
Low Slope Ring Parameters
-------------------------------------------------------------------------------
Start Avg
Max Avg
===============================================================================
*A:SAH01-051>show>qos#
Output
Slope QoS Policy Output Fields (for 7210 SAS-D) — The following table describes slope QoS
policy output fields.
Table 54: Show QoS Slope Policy Output Fields
Policy
Description
Time Avg
Slope Parameters
7210 SAS D, E, K OS Quality of Service Guide
: default
: Default slope policy.
: 70
: 90
: 50
: 75
: 70
: 90
: 50
: 75
Label
The ID that uniquely identifies the policy.
A string that identifies the policy's context in the configuration file.
The weighting between the previous shared buffer average utilization
result and the new shared buffer utilization.
Admin State
: Disabled
Max Prob.
: 80
Admin State
: Disabled
Max Prob.
: 80
Admin State
: Disabled
Max Prob.
: 80
Admin State
: Disabled
Max Prob.
: 80
Description
Show Commands
Page 515
Advertisement
Table of Contents
