Alcatel-Lucent 7210 SAS Series Quality Of Service Manual page 238

Overview of service ingress policy on 7210 SAS-K
•
•
•
The following are rules for meter selection for IES and VPRN services when PIM/multicast is
enabled in the service and when meter "11" is defined in the policy:
•
•
•
Page 232
If a FC is created without explicit meters, the default meter "1" is used for unicast traffic
and multicast traffic.
If a FC is created with an explicit unicast meter, that meter is used for unicast traffic and
for multicast traffic.
If a FC is created with an explicit unicast meter and explicit multicast meter, use the
unicast meter for unicast traffic and multicast meter for multicast traffic.
If a FC is created without explicit meters, use the default meter "1" for unicast traffic and
default meter "11" for multicast traffic.
If a FC is created with an explicit unicast meter, use that meter for unicast traffic and use
default meter "11" for multicast traffic.
If a FC is created with an explicit unicast meter and explicit multicast meter, use the
unicast meter for unicast traffic and multicast meter for multicast traffic.
7210 SAS D, E, K OS Quality of Service Guide