Alcatel-Lucent 7210 SAS Series Quality Of Service Manual page 165

Service access switch, os
Table of Contents

Advertisement

cbs
Syntax
cbs size-in-kbits
no cbs
Context
config>qos>network>ingress>meter
Description
Platforms Supported: 7210 SAS-E.
This command provides a mechanism to override the default reserved tokens for the meter. The
committed burst size parameter specifies the maximum burst size that can be transmitted by the
source while still complying with the CIR. If the transmitted burst is lower than the CBS value
then the packets are marked as in-profile by the meter to indicate that the traffic is complying
meter configured parameters.
The no form of this command returns the CBS size to the default value.
Default
32Kbits
Parameters
size-in-kbits — Specifies the size parameter is an integer expression of the number of kilobits reserved for
the meter. For example, if a value of 10KBits is desired, then enter the value 10.
Values
cbs
Syntax
cbs size [kbits|bytes|kbytes]
no cbs
Context
config>qos>network>ingress>meter
Description
Platforms Supported: 7210 SAS-D.
This command provides a mechanism to override the default CBS for the meter. The committed burst size
parameter specifies the maximum burst size that can be transmitted by the source while still complying with
the CIR. If the transmitted burst is lower than the CBS value then the packets are marked as in-profile by the
meter to indicate that the traffic is complying meter configured parameters.
The no form of this command returns the CBS size to the default value.
Default
32kbits
Parameters
size — Specifies the size parameter is an integer expression of the number of kilobits or kilobytes or bytes
reserved for the meter. For example, if a value of 100 KBits is desired, then enter the value 100. The
bucket size is rounded off to the next highest 4096 bytes boundary. The value can be specified in either
kilobits or kilobytes or bytes. The value can be specified in either kilobits or kilobytes or bytes.
Values
7210 SAS D, E, K OS Quality of Service Guide
32— 16384, default
kbits : [4..16384 | default]
bytes : [512..2097152]
Operational Commands
Page 165

Advertisement

Table of Contents
loading

This manual is also suitable for:

7210 sas k7210 sas d7210 sas e

Table of Contents