Table of Contents
Advertisement
Service Ingress MAC QoS Policy Match Commands
inner-dot1p
Syntax
inner-dot1p dot1p-value [dot1p-mask]
no inner-dot1p
Context
config>qos>sap-ingress>mac-criteria>entry
Description
Platforms Supported: 7210 SAS-K.
Configures the Dot1p value to be used as a service ingress QoS policy match criterion to match against the
Dot1p value in the inner tag (the one that follows the outermost tag in the packet) of the received packet.
The no form of this command removes the previously entered dot1p value as the match criteria.
Default
no inner-dot1p
Parameters
dot1p-value — Specify the Dot1p value to match.
Values
dot1p-mask — Specify the mask value to match a range of Dot1p values.
Values
inner-tag
Syntax
inner-tag value [vid-mask]
no inner-tag
Context
config>qos>sap-ingress>mac-criteria>entry
Description
Platforms Supported: 7210 SAS-K.
Configures the VLAN value to be used as a service ingress QoS policy match criterion to match against the
VLAN value in the inner tag (the one that follows the outermost tag in the packet) of the received packet.
The no form of this command removes the previously entered VLAN tag value as the match criteria.
Default
no inner-tag
Parameters
value — Specify the VLAN value to use for the match
Values
vid-mask — Specify the mask value to match a range of VLAN values.
Values
Page 326
[0..7]
[0..7] - accepts decimal hex or binary
[0..4095] decimal or [0x0..0xFFF] hex
[1..4095] decimal or [0x1..0xFFF] hex
7210 SAS D, E, K OS Quality of Service Guide
Advertisement
Table of Contents
