Table of Contents
Advertisement
•
•
•
•
The following describes the usage of meters when meter in a VPLS service "11" is defined in the
policy:
•
•
•
•
•
•
The following are rules for meter selection for Epipe, IES services: (NOTE: these rules apply to
IES services when PIM is not enabled in the service).
•
•
The following are rules for meter selection for IES and VPRN services when PIM/multicast is
enabled in the service and describes the usage of meters when meter "11" is not configured in the
policy:
7210 SAS D, E, K OS Quality of Service Guide
If a FC is created with an explicit unicast meter and explicit broadcast meter, use these
meters for unicast and broadcast traffic respectively and use the unicast meter for all other
traffic types.
If a FC is created with an explicit unicast meter and explicit multicast meter, use the
unicast meter for unicast traffic and multicast meter for all other traffic types.
If a FC is created with an explicit unicast meter, an explicit broadcast meter, and an
explicit multicast meter, use these meters for unicast, broadcast and multicast traffic types
respectively. Unknown unicast traffic type will use the explicitly defined multicast meter.
If a FC is created with an explicit unicast meter, an explicit broadcast meter, an explicit
unknown-unicast meter, and an explicit multicast meter, use these meters for unicast,
broadcast, unknown-unicast and multicast traffic types respectively.
If a FC is created without explicit meters, use the default meter "1" for unicast traffic and
default meter "11" for all other traffic types (such as broadcast, multicast and unknown-
unicast).
If a FC is created with an explicit unicast meter, use that meter for unicast traffic and use
default meter "11" for all other traffic types.
If a FC is created with an explicit unicast meter and explicit broadcast meter, use these
meters for unicast and broadcast traffic respectively and use meter "11" for all other traffic
types.
If a FC is created with an explicit unicast meter and explicit multicast meter, use the
unicast meter for unicast traffic and multicast meter for all other kinds of traffic.
If a FC is created with an explicit unicast meter, an explicit broadcast meter, and an
explicit multicast meter, user these meters for unicast, broadcast and multicast traffic types
respectively. Unknown unicast traffic type will use the explicitly defined multicast meter.
If a FC is created with an explicit unicast meter, an explicit broadcast meter, an explicit
unknown-unicast meter, and an explicit multicast meter, use these meters for unicast,
broadcast, unknown-unicast and multicast traffic types respectively.
A multipoint meter cannot be used. A multipoint meter configured in a policy is not used
when the policy is applied to a SAP in an Epipe service.
All FCs associated with a meter always use the unicast meter.
Service Ingress QoS Policies
Page 231
Advertisement
Table of Contents
