Table of Contents
Advertisement
outer-dot1p
Syntax
outer-dot1p dot1p-value [dot1p-mask]
no outer-dot1p
Context
config>qos>sap-ingress>mac-criteria>entry
Description
Platforms Supported: 7210 SAS-K.
Configures the Dot1p value to be used as a service ingress QoS policy match criterion to match against the
Dot1p value in the outermost tag of the received packet.
The no form of this command removes the previously entered dot1p value as the match criteria.
Default
no outer-dot1p
Parameters
dot1p-value — Specify the Dot1p value to match.
Values
dot1p-mask — Specify the mask value to match a range of Dot1p values.
Values
outer-tag
Syntax
outer-tag value [vid-mask]
no outer-tag
Context
config>qos>sap-ingress>mac-criteria>entry
Description
Platforms Supported: 7210 SAS-K.
Configures the VLAN value to be used as a service ingress QoS policy match criterion to match against the
VLAN value in the outermost tag in the packet of the received packet.
The no form of this command removes the previously entered VLAN tag value as the match criteria.
Default
no outer-tag
Parameters
value — Specify the VLAN value to use for the match.
Values
vid-mask — Specify the mask value to match a range of VLAN values.
Values
7210 SAS D, E, K OS Quality of Service Guide
[0..7]
[0..7] - accepts decimal hex or binary
[0..4095] decimal or [0x0..0xFFF] hex
[1..4095] decimal or [0x1..0xFFF] hex
Operational Commands
Page 327
Advertisement
Table of Contents
