Table of Contents
Advertisement
WRED command
Table 54: Show QoS Slope Policy Output Fields (Continued)
Start Avg
Max Avg
Admin State
Max Prob.
Sample Output
*A:SAS-D>show>qos# slope-policy abc detail
===============================================================================
QoS Slope Policy
===============================================================================
Policy
Description
-------------------------------------------------------------------------------
High Slope
-------------------------------------------------------------------------------
-------------------------------------------------------------------------------
QueueId
-------------------------------------------------------------------------------
Queue1
Queue2
Queue3
Queue4
Queue5
Queue6
Queue7
Queue8
-------------------------------------------------------------------------------
Low Slope
-------------------------------------------------------------------------------
-------------------------------------------------------------------------------
QueueId
-------------------------------------------------------------------------------
Queue1
Queue2
Queue3
Page 516
Label
Specifies the low priority or high priority RED slope position for the
shared buffer average utilization value where the packet discard
probability starts to increase above zero.
Specifies the percentage of the shared buffer space for the buffer pool
at which point the drop probability becomes 1, expressed as a decimal
integer
Up —
Down —
Specifies the low priority or high priority RED slope position for the
maximum non-one packet discard probability value before the packet
discard probability rises directly to one.
Specifies the high priority RED slope position for the maximum non-
one packet discard probability value before the packet discard proba-
bility rises directly to one.
: abc
: (Not Specified)
State
Start-Avg(%)
Down
Down
Down
Down
Down
Down
Down
Down
State
Start-Avg(%)
Down
Down
Down
7210 SAS D, E, K OS Quality of Service Guide
Description
The administrative status of the RED slope is enabled.
The administrative status of the RED slope is disabled.
Max-Avg(%)
70
90
70
90
70
90
70
90
70
90
70
90
70
90
70
90
Max-Avg(%)
50
75
50
75
50
75
Max-Prob(%)
75
75
75
75
75
75
75
75
Max-Prob(%)
75
75
75
Advertisement
Table of Contents
