Chrysler Sebring 2004 Service Manual page 1670

JR
SECONDARY SILL
WEATHERSTRIP
REMOVAL
(1) Open door.
(2) Using fork tool C-4829, disengage push in fas-
teners attaching secondary sill weatherstrip to bot-
tom of door.
(3) Remove secondary sill weatherstrip from vehi-
cle (Fig. 23).
Fig. 23 Secondary Sill Weatherstrip – Typical
1 - DOOR
2 - SECONDARY SILL WEATHERSTRIP
INSTALLATION
(1) Place secondary sill weatherstrip into position.
(2) Install push in fasteners attaching secondary
sill weatherstrip to bottom of door.
(3) Close door.
SIDE RAIL WEATHERSTRIP
REMOVAL
FRONT
(1) Partially raise convertible top.
(2) Remove push in fasteners attaching weather-
strip to retainer.
(3) Remove weatherstrip from vehicle (Fig. 24).
CENTER
(1) Partially raise convertible top.
(2) Remove push in fasteners attaching weather-
strip to retainer.
(3) Remove weatherstrip from vehicle (Fig. 25).
WEATHERSTRIP/SEALS
Fig. 24 Front Side Rail Weatherstrip
1 - CONVERTIBLE TOP
2 - A-PILLAR
3 - FRONT SIDE RAIL WEATHERSTRIP
Fig. 25 Center Side Rail Weatherstrip
1 - CONVERTIBLE TOP
2 - CENTER SIDE RAIL WEATHERSTRIP
3 - QUARTER PANEL
23 - 143