Chrysler Sebring 2004 Service Manual page 2035

DRIVEABILITY - GAS
P0320-NO CRANK REFERENCE SIGNAL AT PCM —
TEST
15 NOTE: Before continuing, check the PCM harness connector terminals for
corrosion, damage, or terminal push out. Repair as necessary.
Using the schematics as a guide, inspect the wire harness and connectors. Pay
particular attention to all Power and Ground circuits.
If there are no possible causes remaining, view repair.
Repair
ACTION
Replace and program the Powertrain Control Module in accor-
dance with the Service Information.
Perform POWERTRAIN VERIFICATION TEST VER - 5.
106
Continued
APPLICABILITY
All