Chrysler Sebring 2004 Service Manual page 1317

21 - 56 T850 MANUAL TRANSAXLE
T850 MANUAL TRANSAXLE (Continued)
(15) Remove 1-2/5-R shift rail (Fig. 22).
Fig. 22 1/2-5/R Shift Rail Removal/Installation
1 - 1/2-5/R SHIFT RAIL
(16) Install lifting bar 8489.
(17) Lift geartrain (w/reverse idler gear assy.) out
of transaxle and install on fixture 8487 (Fig. 23).
(18) Remove remaining shift rail and forks from
geartrain (Fig. 23).
(19) Remove lifting bar from geartrain.
NOTE: At this point, differential bearing turning
torque should be measured to ensure proper shim
selection upon reassembly.
(20) Measure differential turning torque. (Refer to
21 - TRANSMISSION/TRANSAXLE/MANUAL/DIF-
FERENTIAL - ADJUSTMENTS)
(21) Using a suitable screwdriver, remove exten-
sion housing axle oil seal (Fig. 24).
Fig. 23 Shift Fork/Rail Orientation
1 - 5/R FORK
2 - 3/4 RAIL ASSEMBLY
3 - 3/4 FORK
4 - 1/2 FORK
Fig. 24 Axle Seal Removal (Bearing Plate Side)
1 - PLATE
2 - SEAL
3 - SCREWDRIVER
JR