Table of Contents
Advertisement
JR
OUTPUT BEARING AND RACE (Continued)
(3) Install tool #6787 and slide hammer (Fig. 110).
Tighten tool to output bearing race.
(4) Using slide hammer, remove output bearing
race.
Fig. 110 Output Bearing Race Removal
1 - C-3752
2 - SPECIAL TOOL 6787
3 - OUTPUT SHAFT BEARING RACE
T350 MANUAL TRANSAXLE
INSTALLATION
(1) Line up output bearing race to race bore.
(2) Insert tool #4628 with C-4171 into output bear-
ing race (Fig. 111). Tap race into bore. Install output
bearing into race. Verify that the larger diameter
cage is facing outward. Position bearing retaining
strap. Tighten bolts to 11 N·m (96 in. lbs.).
Fig. 111 Output Bearing Race Installation
1 - TOOL C-4171
2 - TOOL C-4628
3 - OUTPUT BEARING RACE
21 - 37
Advertisement
Table of Contents
