Table of Contents
Advertisement
JR
REAR SUSPENSION CROSSMEMBER (Continued)
Fig. 18 Lowering And Supporting Rear Suspension
Crossmember
1 - WOODEN BLOCK
2 - TRANSMISSION JACK
3 - REAR SUSPENSION CROSSMEMBER
Fig. 19 Speed Sensor Cable Attachment To Control
1 - UPPER CONTROL ARM
2 - SHOCK ABSORBER
3 - SPEED SENSOR CABLE ROUTING CLIPS
4 - BOLT
5 - SPEED SENSOR CABLE
6 - BRAKE FLEX HOSE BRACKET
7 - BOLT
8 - BRAKE DRUM
(10) Remove the 4 bolts attaching the rear suspen-
sion crossmember to rear frame rails (Fig. 21).
(11) Lower
the
rear
enough to access the upper control arm pivot bar to
crossmember attaching bolts (Fig. 22). Remove the 4
bolts attaching the upper control arms to the suspen-
sion crossmember. Remove the control arms from the
crossmember.
Arm
suspension
crossmember
FRAME & BUMPERS
Fig. 20 REAR CROSSMEMBER
1 - ATTACHING LINE BUNDLE CLIPS
2 - REAR CROSSMEMBER
Fig. 21 Suspension Crossmember Attachment To
Frame Rails
1 - ATTACHING BOLTS
2 - ATTACHING BOLTS
3 - REAR SUSPENSION CROSSMEMBER
(12) Lower the rear suspension crossmember, lat-
eral arms and stabilizer bar as far as possible using
the transmission jack. Then with the aid of a helper
remove rear suspension crossmember from the vehi-
cle.
13 - 11
Advertisement
Table of Contents
