Table of Contents
Advertisement
JR
FRONT SEAT BACK COVER (Continued)
(3) Remove seat back(Refer to 23 - BODY/SEATS/
SEAT BACK - REMOVAL).
(4) Remove upper recliner handle and lumber
adjustment handle, if so equipped.
(5) sRemove seat side shield(Refer to 23 - BODY/
SEATS/SEAT CUSHION SIDE SHIELDS - REMOVAL).
(6) Remove nut attaching lower seat belt anchor to
seat frame (Fig. 8)(Refer to 23 - BODY/SEATS/SEAT
BACK - REMOVAL).
(7) Remove seat belt bezel.
NOTE: The torque prevailing nut used to secure the
lower seat belt anchor is not reusable. Verify avail-
ability prior to proceeding.
(8) Disengage plastic J-strip retainer at bottom of
seat back (Fig. 14).
Fig. 14 Seat Cover Retainer Strip
1 - SEAT BACK
2 - PLASTIC RETAINER STRIP
Fig. 15 Hog Rings
1 - SEAT COVER SEAM STRAP
2 - HOG RING
(9) Remove hog rings holding seat cover seam
cords to wires in seat back foam (Fig. 15) and (Fig.
16).
(10) Feed seat belt bezel and seat belt through
seat cover while pulling cover from seat back foam.
(11) Remove hog rings attaching the seat cover
seam cords and wires to seat back foam.
(12) Poll seat cover upward to mid point position.
(13) Remove head restraint guides (Fig. 17).
(14) Remove seat back cover from seat back foam
and frame.
Fig. 16 Mid Seat Back Hog Rings
1 - CUSHION COVER
2 - HOG RINGS
3 - CUSHION
Fig. 17 2 Head Restraint Guides
1 - SEAT CUSHION
2 - HOG RINGS
3 - HEADREST GUIDES
4 - BOTTOM OF TOP SEAT FRAME RAIL
SEATS
23 - 107
Advertisement
Table of Contents
