Table of Contents
Advertisement
21 - 252
41TE AUTOMATIC TRANSAXLE
VALVE BODY (Continued)
(3) Ensure the transaxle oil pan and transaxle
case sealing surfaces are clean and dry. Install an
1/8" bead of Mopar ATF RTV (MS-GF41) to the oil
pan and install (Fig. 363). Torque oil pan-to-transaxle
case bolts (Fig. 364) to 19 N·m (165 in. lbs.).
Fig. 363 Oil Pan
1 - OIL PAN
2 - 1/8 INCH BEAD OF MOPAR ATF RTV (MS-GF41)
3 - OIL FILTER
(4) Lower vehicle.
(5) Connect transmission range sensor connector.
Fig. 364 Oil Pan Bolts
1 - OIL PAN BOLTS (USE RTV UNDER BOLT HEADS)
(6) Install manual valve lever to manual shaft.
(7) Install gearshift cable to manual valve lever.
(8) Connect battery negative cable.
(9) Fill transaxle with Mopar ATF +4 Transmis-
sion fluid. (Refer to 21 - TRANSMISSION/TRANS-
AXLE/AUTOMATIC - 41TE/FLUID - STANDARD
PROCEDURE)
JR
Advertisement
Table of Contents
