Table of Contents
Advertisement
23 - 110
SEATS
FRONT SEAT CUSHION COVER
REMOVAL - FRONT SEAT CUSHION COVER
NOTE: Fabric covered cushions are serviced as an
assembly.
(1) Remove seat from vehicle.
(2) Remove front seat cushion side shields and dis-
connect wire connectors, if equipped.
(3) Remove seat back.
(4) Remove seat cushion bolts.
(5) Disconnect wire harness fasteners from cushion
pan. (Fig. 21).
(6) Disengage J-strap attaching seat cover from
the seat cushion frame (Fig. 23).
(7) Pull cover off to the hog rings (Fig. 24).
(8) Cut hog rings attaching seat cover seat cush-
ion.
(9) Remove seat cushion cover from seat cushion.
Fig. 23 Front Seat Cushion J-Strap
1 - J-STRAP
INSTALLATION - FRONT SEAT CUSHION
COVER
NOTE: Fabric covered cushions are serviced as an
assembly.
(1) Position seat cover on cushion.
(2) Align seat cover with cushion alignment inden-
tations (Fig. 25).
(3) Install hog rings.
(4) Engage J-strap attaching seat cover to front of
seat cushion frame.
Fig. 24 Seat Cushion Cover
1 - SEAT COVER
2 - HOG RINGS
(5) Install wire harness fasteners to cushion pan.
(6) Install seat cushion bolts.
(7) Install seat back. Tighten recliner bolts to 12
N·m (9 ft. lbs.) torque. Tighten pivot bolts to 40 N·m
(30 ft. lbs.) torque.
(8) Connect switch wire connectors to the cushion
side shield, if equipped.
(9) Install cushion side shields.
(10) Install seat in vehicle.
Fig. 25 Seat Cushion
1 - SEAT CUSHION
2 - ALIGNMENT INDENTATIONS
3 - HOOK AND LOOP FASTENER
JR
Advertisement
Table of Contents
