Chapter 7
Updating Firmware
Updating Firmware
This section describes how to update the firmware of ZW Series Controllers.
Use Warp Engine ZW to update the firmware.
Warp Engine ZW is automatically installed when Smart Monitor ZW is installed.
The most recent version of the software can be downloaded from the following website for
OMRON members. Refer to the Member Registration Sheet that is enclosed with the
Controller.
http://www.omron-cxone.com/zw
• While updating, do not turn off the power of the controller. The controller will not start normally.
• To install, log on as an Administrator or a user with system access rights.
Flow of Updating Firmware
ZW
7-8
User's Manual
Connecting Controller to
a personal computer
Installing Smart Monitor ZW
Starting Warp Engine ZW
Normal?
Setting the firmware information
Performing update of firmware
Error?
Normal end
Refer to "Troubleshooting" -
"Communication error" (p.7-4)
Please contact an OMRON
sales representative.