Settings For I/O Signals - Omron ZW Series User Manual

Settings for I/O Signals

This section describes the settings for controlling by using external I/O signals.
■ Binary output object task selection input
The task output as binary is selected in combinations of the binary output object task
selection input signals (BINARY_SEL1 and 2).
Binary output object
task selection input 1
(BINARY_SEL1)
OFF
ON
OFF
ON
■ Binary output task number outputs
The task number currently output as binary is output.
The output task number is according to the combination of the binary output task
number outputs (BINARY_OUT1 and 2).
Binary output task
number output 1
(BINARY_OUT1)
OFF
ON
OFF
ON
Binary output object
task selection input 2
(BINARY_SEL2)
OFF TASK1
OFF TASK2
ON TASK3
ON TASK4
Binary output task
number output 2
(BINARY_OUT2)
OFF TASK1
OFF TASK2
ON TASK3
ON TASK4
Selected task
Output task
Chapter 4
Settings for I/O
ZW
4-31
User's Manual