Omron ZW Series User Manual page 103

■ Manual scaling
Set the scaling by entering the correction value.
Setting [Display]
Span [SPAN]
Offset [OFFSET]
Setting the Output Conditions
Description
Sets the inclination of the sensor characters as a
coefficient.
Range: -2.0000 to 2.0000 (Default value: 1.0000)
Measurement value
(mm)
2.0
-2.0
Adds/subtracts a fixed value to or from the measured
value.
Range: -999.999999 to 999.999 (Default value: 0)
Measurement value
(mm)
Chapter 3
Workpiece
displacement
Workpiece
displacement
User's Manual
ZW
3-25