Omron ZW Series User Manual page 70

Chapter 2
Functions and Operations during Measurement
■ Display details change
The measurement result displayed on the main display in RUN mode can be selected
from TASK 1 to 4.
The number of digits displayed can also be changed.
Settings [Display]
Task for displayed target
[DISP]
Decimal point digit
[DEC.NUM]
As an example, here is an explanation of the procedure for setting TASK2 as the task
to be displayed target.
Operating procedure
Steps
1
2
3
4
ZW
2-12
User's Manual
TASK1/TASK2/TASK3/TASK4
0 [0DIG]/1 [1DIG]/2 [2DIG]/3 [3DIG]/4 [4DIG]/5 [5DIG]
Key operation Display
RUN RUN
FUN FUN
H L
L
TEACH TEACH
ZERORST/ ESC ZERORST/ ESC
ZERO/ ZERO/ SET SET
ZERORST/ ESC ESC
ZERORST/
ZERO/ ZERO/ SET SET
ZERORST/ ZERORST/ ESC ESC
H L
Description [Display]
RUN RUN
Press key in the RUN mode to display the
LIT
FUN FUN
L
TEACH TEACH
setting menu.
RUN RUN
Press or keys to select either of "DISP" and
press key.
ZERO/ SET ZERO/ SET
Select the task to be displayed target.
The current setting value is displayed on the sub-
display.
Press / key to enter the editing mode, and the
sub-display blinks.
Select either of "TASK2" and press
ZERORST/ ESC ZERORST/ ESC
Press key in the RUN mode to exit the setting
LIT
menu.
RUN RUN
Description
key.
ZERO/ SET ZERO/ SET