Table of Contents
Advertisement
• Use exclusive devices, including a sensor head, Calibration ROM, fiber cable or RS-
232C cable, to connect, or ignition, burst, false operation or breakdown may be
caused.
•Do not cut fiber cable. Glass at the cut section may cause injury. Also, if cut, it will not
work normally anymore.
• Whenever any trouble, including, strange odor smelled, the body overheated or
smoke escaped, was found, immediately stop the operation, and consult an OMRON
branch or sales office with the system shut down.
• Do not drop or make a strong impact on the unit.
• Before using any equipment provided with a lock mechanism, make sure that it has
been locked.
(4) Regulations and Standards
This sensor conforms to the following EMC directive and EN standard:
• EMC directive, No. 2004, 108, EC
• EN standard, EN61326
(5) Notice for Korea Radio Law
Introduction
Precautions for Safe Use
User's Manual
ZW
7
Advertisement
Table of Contents
