Omron ZW Series User Manual page 118

Chapter 3
Setting the Output Conditions
■Status
Set valid/invalid for the zero reset function.
Setting [Display]
On [ON]
(Default value)
Off [OFF]
The status is set for each task.
As an example, here is an explanation of the procedure for selecting the "ON"
(Enabled) zero reset type setting.
Operating procedure
Steps
1 - 5 For moving to ZERO, see steps 1 to 5 in p.3-38
6
7
8
ZW
3-40
User's Manual
When a zero reset input is received externally, a zero reset is executed.
Even when a zero reset input is received externally, a zero reset is not
executed.
Key operation Display
ZERORST/ ESC ZERORST/ ESC
ZERO/ SET ZERO/ SET
ZERORST/ ZERORST/ ESC ESC
ZERO/ SET ZERO/ SET
RUN RUN
H L
FUN FUN
L
TEACH TEACH
Description
Press or keys to select either of "STATUS"
and press key.
ZERO/ ZERO/ SET SET
Enable the zero reset.
The current setting value is displayed on the sub-
display.
Press / keys to enter the editing mode, and the
sub-display blinks.
Select "ON" and press
RUN RUN
Press key for two seconds to enter the RUN
LIT
FUN FUN
L
TEACH TEACH
mode.
RUN RUN
Description
key.
ZERO/ SET ZERO/ SET