Updating Firmware
This section describes how to update the firmware of ZS Series Controllers (such as ZS-
HLDC/ZS-MDC). Use Warp Engine ZS to update the firmware. Warp Engine ZS is
automatically installed when SmartMonitor ZS is installed.
For the file for updating, please contact your OMRON representative.
• While updating, do not turn off the power of the controller. The controller will not start normally.
• To install the USB driver, log on as an Administrator or a user with system access rights.
Flow of Updating Firmware
Connecting Controller to
a personal computer
Normal?
Installing SmartMonitor ZS
Starting warp engine ZS
Normal?
Setting the firmware information
Performing update of firmware
Error?
Normal end
Updating Firmware
Installing the USB driver
Setting the connection port
Please contact an OMRON
sales representative.
Section9
ZS-HL
9-15
User's Manual