Table of Contents
Advertisement
■ Entering numerical values
To enter numerical values, including parameters, for the sub-display, follow the steps
below:
Sub-display
(Parameter)
(1) When entering numerical values, the sub-display displays the current setting value
and its uppermost digit flashes.
(2) Press the
/
Press the
key on the rightmost digit moves blinking to the leftmost digit.
Press the
key on the leftmost digit moves blinking to the rightmost digit.
(3) Press the
/
(4) Press the
ZERO/
ZERO/ SET
SET
● Positioning decimal point
To position a decimal point, follow the steps below:
Sub-display
(Parameter)
(1) If a decimal point has been defined, it flashes on the sub-display.
(2) Press the
/
Position the decimal point at the rightmost digit to erase it.
Press the
key on the rightmost digit moves blinking to the leftmost digit.
Press the
key on the leftmost digit moves blinking to the rightmost digit.
(3) Press the
ZERO/
ZERO/ SET
SET
Select
digit
keys to select a digit to enter a number.
keys to select a number to enter.
key to apply the entered value.
Select
position
keys to position the decimal point.
key to apply the position of the decimal point.
Overview of Setting and Measurement
Select
value
ZERO/ SET
ZERO/
SET
Chapter 2
Apply
ZERO/ SET
ZERO/
SET
Apply
ZW
User's Manual
2-5
Advertisement
Table of Contents
